Avoid These 5 Floor Stripping And Waxing Mistakes.

Dec 6, 2022 | Floor Stripping and Waxing

Floor stripping and waxing are services that help keep your home sparkling and clean. Due to the details of the process, a mistake without prior knowledge can even cause permanent damage to the floor.

Stripping and waxing floors are time-consuming and expensive, but if done properly, it can build up the look of your floors and protect them from future damage. Here are some mistakes people make during this process.

Common Floor Stripping And Waxing Mistakes To Avoid

1. Using the Wrong Chemical

Floor Strippers are highly corrosive. Therefore, it is essential to check if the substrate is compatible with the chemical. For example, surfaces such as marble and premium vinyl tiles can be damaged by contact with specific chemical strippers. Professional floor stripping and waxing companies know the best chemicals for your floors.

2. Not Enough Dwell Time

Dwell time is how long the product must remain wet on the surface for maximum effectiveness. Different commercial cleaners require different contact times depending on the chemical formula and process. Without sufficient exposure time, the stripper does not have enough time to penetrate the top layer of the flooring, making the flooring harder to remove.

3. Improper Chemical Dilution

The floor stripper should be diluted according to the manufacturer’s instructions. Hard solutions can permanently bleach your floors. An important factor to consider when diluting chemicals is to give the optimum value while considering the safety of the building occupants. Therefore, you must ensure that your staff dilutes chemicals according to specifications.

4. Floor Dries Up Before Chemical is Removed

Letting the stripper dry out for too long does its own harm. The most common reason the stripper dries before peeling is applying too little.

The floor scraper needs to be generously carried out to the area. It’s essential to add more if you notice the stripper starting to dry before reaching the recommended exposure time.  As a result, the stripper is too wide, too thin, and dries very quickly.

5. Chemical Remains on the Floor after Rinsing

The final step of stripping the finish from the floor requires rinsing the floor to remove all slurry from the floor. Leave no chemicals or other residue on the floor after rinsing. This step is critical to the success of the finishing process. The residue left on the floor can cause floor damage and many other problems.

Summing up

Stripping and waxing your floors will restore their appearance, protect them from future damage and make them more hygienic. Make sure the flooring can handle the product before applying the floor stripper to the floor.

Always follow the manufacturer’s instructions for proper dilution, application, and dwell time during the procedure for best results.

Finally, make sure all dirt is removed before refinishing the floor. For a more perfect result, it is always feasible to contact a professional to avoid any floor stripping and waxing mistakes.

Related Blogs